• 家图标
  • 箭头图标 产品
  • 箭头图标UHF PCB 发射机 (20-86-5000)

PCB 发射机s - UHF

20-86-5000

Aimed at integrators and developers, the 20-86-5000 series is a small, high specification, POCSAG paging transmitter printed circuit board, inheriting all of the type approvals of the 20-86-9000 Call Point 发射机s range and the 20-86 series Pendant 发射机 range.

The 20-86-5000 is an extremely small, UHF POCSAG paging transmitter PCB powered by a standard CR2032 coin cell. The transmitter will operate for more than 5000 transmissions under normal conditions before needing to be replaced.

The transmitter is ideal for developers and integrators wishing to develop their own low power solution.

Using a POCSAG receiver the 20-86-5000, as with all paging transmitters, can also be used for any general remote control application, such as turning on lights, disabling alarms or switching machinery on or off.

Care is recommended in order to avoid static discharge which may damage the PCB during handling. 

20-86 transmitters support up to 8 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once the operating frequency has been set the 20-86-5000 messages can be changed using configuration software with an optional programming lead.

Although the 20-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having proven to be effective in some cases between floors and across buildings.

  • 超高频操作
  • 体积小、重量轻 & 离散
  • Internal cell battery
  • 具有成本效益的
  • Ideal for short distance paging or telemetry applications
  • Ideal for developers and integrators
  • Capable of operating on existing in-house paging systems
  • Simple 遥测 solution
规范
频率范围 440-470MHz - UHF
Frequency Selection 通过软件
电力供应 3V, CR2032 button cell
电池寿命 约. 5000 transmissions
约. 5年待机
External 电力供应 3.7 to 18 Volts (via onboard regulator)
3 Volts (unregulated; external battery)
Power Consumption Standby: <0.5µA
Transmit: 26mA (no TX LED)
传输能量 10mW
信道间隔 25 khz, 12.5kHz,或者6.25千赫
调制 FSK with NRZ data
偏差 ±4.5 khz,±2.3kHz,或±1.0赫兹
输入 Eight; user programmable
波特率 512, 1200, or 2400
消息格式 POCSAG, Alphanumeric or Numeric
Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
Configuration Application Sacoto (Salcom Configuration Tool Software)
Received Indication Outputs Two LED outputs; via 680Ω resistor
Transmit Indication Output TX LED; via 680Ω resistor
Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
Programming Cable 20-51-0001 (USB)
串行端口 9600 , N, 8, 1; RS232
天线 External; connection via thru-hole pad or castellation
Environmental Protection None, PCB must be housed in suitable enclosure
Operating Temperature 10ºC to +55ºC (+14ºF to +131ºF)
重量 6g含电池
板尺寸 55.5mm x 32.5mm x 6.5mm(长×宽×高)
类型的审批 En 301 489-2 v2.1.1 (2019-4)
En 300 224 v2.1.1, 2017-06
20-86-5000 Brochure
20-86-5000 Manual
  • 编程:
    Programming of the 20-86-5000 is as per the 20 - 86系列 transmitters. Please see Manual for instructions
20-86-5000 Configuration Tool
  • 信息

    The 20-86-5000 is an extremely small, UHF POCSAG paging transmitter PCB powered by a standard CR2032 coin cell. The transmitter will operate for more than 5000 transmissions under normal conditions before needing to be replaced.

    The transmitter is ideal for developers and integrators wishing to develop their own low power solution.

    Using a POCSAG receiver the 20-86-5000, as with all paging transmitters, can also be used for any general remote control application, such as turning on lights, disabling alarms or switching machinery on or off.

    Care is recommended in order to avoid static discharge which may damage the PCB during handling. 

    20-86 transmitters support up to 8 inputs, each of which can be programmed with up to a 35-character message. Programming can be either with a serial programming cable that can be purchased separately or pre-programmed when supplied. Once the operating frequency has been set the 20-86-5000 messages can be changed using configuration software with an optional programming lead.

    Although the 20-86 is a low power transmitter, a direct line of sight transmission range of up to 200 metres can be expected. Transmit range within buildings is reduced, but still considerable having proven to be effective in some cases between floors and across buildings.

  • Details
    • 超高频操作
    • 体积小、重量轻 & 离散
    • Internal cell battery
    • 具有成本效益的
    • Ideal for short distance paging or telemetry applications
    • Ideal for developers and integrators
    • Capable of operating on existing in-house paging systems
    • Simple 遥测 solution
  • 规范
    规范
    频率范围 440-470MHz - UHF
    Frequency Selection 通过软件
    电力供应 3V, CR2032 button cell
    电池寿命 约. 5000 transmissions
    约. 5年待机
    External 电力供应 3.7 to 18 Volts (via onboard regulator)
    3 Volts (unregulated; external battery)
    Power Consumption Standby: <0.5µA
    Transmit: 26mA (no TX LED)
    传输能量 10mW
    信道间隔 25 khz, 12.5kHz,或者6.25千赫
    调制 FSK with NRZ data
    偏差 ±4.5 khz,±2.3kHz,或±1.0赫兹
    输入 Eight; user programmable
    波特率 512, 1200, or 2400
    消息格式 POCSAG, Alphanumeric or Numeric
    Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
    Configuration Application Sacoto (Salcom Configuration Tool Software)
    Received Indication Outputs Two LED outputs; via 680Ω resistor
    Transmit Indication Output TX LED; via 680Ω resistor
    Transmit Duty Cycle Up to 20%; Maximum 30 seconds on time
    Programming Cable 20-51-0001 (USB)
    串行端口 9600 , N, 8, 1; RS232
    天线 External; connection via thru-hole pad or castellation
    Environmental Protection None, PCB must be housed in suitable enclosure
    Operating Temperature 10ºC to +55ºC (+14ºF to +131ºF)
    重量 6g含电池
    板尺寸 55.5mm x 32.5mm x 6.5mm(长×宽×高)
    类型的审批 En 301 489-2 v2.1.1 (2019-4)
    En 300 224 v2.1.1, 2017-06
  • 手册 & 下载
    20-86-5000 Brochure
    20-86-5000 Manual
    • 编程:
      Programming of the 20-86-5000 is as per the 20 - 86系列 transmitters. Please see Manual for instructions
    20-86-5000 Configuration Tool

Does your project needs a reliable wireless component?

Not sure how your project can benefit from our systems? 与…取得联系
discuss your requirements with our wireless engineers.

" class="hidden">百林通信